Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Parameter Identification in Partial Integro-Differential Equations for Physiologically Structured Populations

S. Moenickes, O. Richter, and K. Schmalstieg
Institut für Geoökologie, Abt. Umweltsystemanalyse, Technische Universität Braunschweig, Germany

Continuous dynamic models, e.g. COMSOL based simulations, play – besides statistical or iterative methods – a mayor role in theoretical ecology; in forecasting and management, but also in systems analysis. Ecological issues generally comprise highly interacting agents and/or unknown side effects. Here we show how combining direct simulation with COMSOL with simple optimization tools ...

Hybrid FEM-BEM Approach for Two- and Three-Dimensional Open Boundary Magnetostatic Problems

A. Weddemann[1], D. Kappe[2], and A. Hütten[2]
[1]Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge MA, USA
[2]Department of Physics, Thin Films and Physics of Nanostructures, Bielefeld University, Bielefeld, Germany

In principal, the calculation of the magnetic state inside a magnetic object requires the evaluation of the field in the entire unbounded space. With finite element methods restricted to finite domains, commonly auxiliary domains are employed which result in a non-physical cut-off. Not only that these additional domains result in an increased number of degrees of freedom which are strictly ...

Finite Element Convergence and Speed-Up Studies Using COMSOL Multiphysics and LiveLink™ for MATLAB® with Large Assembly Models

H. Pourzand[1], A.H. Aziz[1], A. Singh[1]
[1]Pennsylvania State University, State College, PA, USA

COMSOL Multiphysics along with its LiveLink™ for MATLAB® is used to investigate the needed number of elements and the required order of Lagrangean p element for a number of different simulation models. For this task, convergence study, speed up testing and interactive meshing is performed on a large assembly model which is also imported using the LiveLink™ for SolidWorks®. As a test bench, the ...

Optimization of Micro-Structured Waveguides in Lithium Niobate (Z-Cut) - new

H. Karakuzu[1], M. Dubov[1], S. Boscolo[1]
[1] Aston University, Birmingham, UK

We present an optimization procedure to improve the propagation properties of the depressed-cladding, buried micro-structured waveguides formed in a z-cut lithium niobate (LN) crystal by high repetition rate femtosecond (fs) laser writing. It is shown that the propagation wavelength for which the confinement losses of ordinary (O) and extraordinary ordinary (E) polarizations are below 1 dB/cm ...

COMSOL Multiphysics Models for Teaching Chemical Engineering Fundamentals: Absorption Column Models and Illustration of the Two-Film Theory of Mass Transfer

W. Clark
Chemical Engineering Department, Worcester Polytechnic Institute, Worcester, MA, USA

COMSOL® models have been developed for teaching gas absorption fundamentals. Model results are compared to environmentally significant experimental results for removing CO2 and SO2 from air using water as solvent. For concentrated gas mixtures, the models are shown to be equivalent to but easier to use than the traditional graphical integration method and to a solution method developed with ...

Multiphysics Software Applications in Reverse Engineering

W. Wang[1], K. Genc[2]
[1]University of Massachusetts, Lowell, MA, USA
[2]Simpleware, Exeter, United Kingdom

During the past decade reverse engineering has become a common and acceptable practice utilized by many aftermarket suppliers, and even original equipment manufacturers (OEM). This presentation focuses on the applications of multiphysics software such as COMSOL and Simpleware® in reinventing the design details and manufacturing processes of an existing part in the absence of the original design ...

Fracture on Circuit Board Internal Layers Due to Thermal Stress on Soldered Pins

F. Figueroa[1], P. Aguirre[1]
[1]Sensor Technik Wiedemann GmbH, Kaufbeuren, Germany

Circuit board failures are often ignored because they could be impreceptible. This simulation examines how internal layers around a soldered pin via subject to temperature changes during the soldering process are affected, show the forces involved and determine breaking points. A 2D thermo-mechanical model of a soldered pin is achieved in two simulation steps. First, a connecting pin already ...

Reliable Full-Wave EM Simulation of a Single-Layer SIW Interconnect with Transitions to Microstrip Lines - new

J. L. Chavez-Hurtado[1], J. E. Rayas-Sanchez[1], Z. Brito-Brito[1]
[1]ITESO - Universidad Jesuita de Guadalajara, Tlaquepaque, Jalisco, Mexico

We present a procedure to obtain reliable EM responses for a SIW interconnect with microstrip line transitions. The procedure focuses on two COMSOL® configuration settings: meshing size and simulation bounding box. Once both are properly configured, the implemented structure is tested by perturbing the simulation bounding box to ensure it has no effect on the EM responses.

3D COMSOL Multiphysics® Model of a Plate Heat Exchanger to Support a Laboratory Teaching Environment - new

N. Medeiros[1], W. Clark[1]
[1]Worcester Polytechnic Institute, Worcester, MA, USA

Chemical engineering students and practitioners need an understanding of fluid flow and heat transfer inside heat exchangers. Because the flow within plate heat exchangers is difficult to visualize, we developed COMSOL Multiphysics® simulations of plate heat exchangers for students to study alongside a physical heat exchanger in a laboratory setting. Simulative experiments allow students to ...

Solving Time-Dependent Optimal Control Problems in COMSOL Multiphysics

I. Neitzel[1], U. Prüfert[2], and T. Slawig[3]
[1]DFG priority program SPP 1253, Technische Universität Berlin, Berlin, Germany
[2]DFG research center Matheon, Technische Universität Berlin, Germany
[3]DFG Cluster of Excellence The Future Ocean, DFG priority progam SPP 1253, Christian-Albrechts-Universität zu Kiel, Kiel, Germany

We use COMSOL Multiphysics to solve time-dependent optimal control problems for partial differential equations whose optimality conditions can be formulated as a PDE. For a class of linear-quadratic model problems we summarize known analytic results on existence of solutions and first order optimality conditions that exhibit the typical feature of time-dependent control problems, namely the fact ...