Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Computation of Capacitance, Inductance, and Potential Distribution of Integrated-Circuit Interconnects for Unshielded Four Conductors with Three Levels Systems

S.M. Musa[1], M.N.O. Sadiku[1], J.D. Oliver[1]
[1]Prairie View A&M University, Prairie View, TX, USA

In this paper an attempt has been made to design and analyze integrated circuit interconnects for unshielded four conductors with three levels system using Finite Element Method (FEM). The computational and simulation work has been carried out with help of COMSOL Multiphysics software. We illustrate that FEM is as accurate and effective for modeling multilayered multiconductor transmission ...

Plasmonic Properties of Bimetal Nanoshell Cylinders and Spheres

K. Ehrhold[1], S. Christiansen[1,2], and U. Gösele[1]
[1]Max Planck Institute of Microstructure Physics, Halle, Germany,
[2]Institute of Photonic Technology, Jena, Germany

Plasmonics is a new branch of the fascinating field of photonics and develops concepts to quench light beyond the diffraction limit and enhance electromagnetic fields. These enhancements occur in metals as localized surface plasmon polaritons (LSP) a coupling of the surface density oscillations of the electron gas to the incident light. With threedimensional nano-structures of coinage metals ...

Pulsed Power Accelerator Design with COMSOL Multiphysics® Software - new

D. Reisman[1]
[1]Sandia National Laboratories, Albuquerque, NM, USA

We have developed Thor: a pulsed power accelerator for performing dynamic material experiments. The design was aided by using the COMSOL Multiphysics® software with the AC/DC Module and RF Module. Our design process involved optimizing the impedance of the system while maintaining a good margin against electrical breakdown. By using a three-dimensional electromagnetic model of the entire power ...

A Novel Type of Pattern Synthesis Implementation using Corrugated Apertures

N. Herscovici [1], A. Boryssenko [2]
[1] Air Force Research Lab, Wright-Patterson AFB, OH, USA
[2] A&E Partnership, Belchertown, MA, USA

The antenna pattern synthesis problem is of the utmost importance in almost every kind of antenna applications. Therefore, a very large number of contributions have appeared on this subject. A number of different implementation methods are well known, and widely used. In this paper we present a new method that takes advantage of the antenna geometry to generate an aperture phase distribution ...

Hyperbolic Heat Transfer Equation for Radiofrequency Heating: Comparison between Analytical and COMSOL Solutions

V. Romero-García[1], M. Trujillo[2], M.J. Rivera[2], J.A. López Molina[2], and E.J. Berjano[3]
[1]Centro de Tecnologías Físicas Acústica, Universidad Politécnica de Valencia, Valencia, Spain
[2]Dpto. Matemática Aplicada, Instituto Universitario de Matemática Pura y Aplicada, Universidad Politécnica de Valencia, Valencia, Spain
[3]Institute for Research and Innovation on Bioengineering, Universidad Politécnica de Valencia, Valencia, Spain

The Radiofrequency Heating (RFH) is widely employed to heat biological tissue in different surgical procedures. Most models analyze the RFH employing a Parabolic Heat Transfer Equation (PHTE) based on Fourier's theory. The PHTE can be used for problems involving long heating times or low thermal gradients. However, when the problem involves short heating times or extreme thermal gradients it is ...

Prism Coupling of Light in Optical Waveguides

J.T. Andrews, R.R. Kumar, and P.K. Sen
Department of Applied Physics, S G S Institute Technology & Science, Indore, Maharashtra, India

We report the results of simulation showing light coupling in waveguides through prism coupling method. Prism coupling method of light coupling in waveguides is a dominant method adopted by photonic device fabricators. It is necessary to understand the effect various parameters on light coupling in such processes. We used industry standard PDE solver COMSOL Multiphysics to study and analyze the ...

Topographic Effects on Radio Magnetotelluric Simulations on Levees: Numerical Modeling for Future Comparison With Fields Results

R. Duval[1], C. Fauchard[1], R. Antoine[1]
[1]ERA23-IFSTTAR, Laboratoire des Ponts et Chaussées de Rouen, CETE-Normandie Centre, France

We study the topography influence of levees on the electric resistivity signal obtained with the Radio-Magnetotelluric method. Field measurements have been modeled with COMSOL, using the AC/DC and RF Modules. A levee situated in Orléans along the Loire river (France) has been considered in order to design a model tacking account of the skin depth and the incident wavelength, keeping a constant ...

A Study on the Suitability of Indium Nitride for THz Plasmonics

A. Shetty[1], K. J. Vinoy[1], S. B. Krupanidhi[2]
[1]Electrical Communication Engineering, Indian Institute of Science, Bangalore, India
[2]Materials Research Centre, Indian Institute of Science, Bangalore, India

As interest in the electromagnetic spectrum expands towards the infrared and terahertz range, the distinct advantages of using semiconductors instead of metals for plasmonic applications must be understood. Plasmonic resonances in gold (Au) and indium nitride (InN) gratings are studied, in the terahertz (?=30µm) regime. The electromagnetic properties of Au and InN are described by the Drude ...

Radio Frequency Tissue Ablation Simulation with COMSOL Multiphysics® Software

N. Elabbasi [1], M. Hancock [1],
[1] Veryst Engineering, Needham, MA, USA

Radiofrequency (RF) tissue ablation is commonly used to treat medical conditions involving dysfunctional tissue especially in the heart, kidneys, lungs, bones, or liver. An electrode at the tip of a catheter delivers high frequency current (350-500 kHz) to the targeted tissue causing it to heat and then ablate without disturbing the electrical signals of the nervous system or heart, and with ...


于雨田 [1],
[1] 四川大学应用电磁所,成都,中国

本作品通过研究微波炉矩形金属璧的单向移动,实现腔体内电场分布的变化,从而达到调节作用腔体内各点的电场分布的目的。图表1为仿真几何模型示意图,除了腔体内部的小块土豆,其余的腔体材料均为理想导体铜,腔体内为标准大气压下的空气。图表1中300mm*30mm*350mm矩形块的设计是为了更便捷地计算移动后的网格。本次仿真沿x轴正方向向外移动2的外侧面金属壁来实现腔体的移动。端口激励源为TE10模、频率2.45GHz、功率700W、相位为0的微波。图表2为金属壁移动示意图,通过软件的移动网格接口实现移动金属壁的仿真。仿真结果良好,图表3和图表4显示了移动后的输入端口S11值以及土豆加热效果,金属壁移动40mm后,加热物体的加热均匀性提高了14.33%,加热效率提高了38.53%,说明合理地移动微波腔体金属壁可以有效地提高模型的加热均匀性和加热效率。研究结果对工业和科研有着较好的参考意义 ...