Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Terahertz Resonant Dipole Nanoantennas

S. Tuccio [1], A. Alabastri[1], L. Razzari[1], A. Toma[1], C. Liberale[1], R. Proietti Zaccaria[1], F. De Angelis[1], G. Das[1], E. di Fabrizio[1]
[1]Istituto Italiano di Tecnologia, Genova, Italy

Nanoantennas have been successfully employed in a wide set of applications. We show the possibility to expand usual nanoantenna functionalities in the THz domain with a gold dipole nanoantenna. We considered an array of aligned planar gold nanoantennas over a silicon substrate. The high near field enhancement, localized at the device ends, indicates potential uses for THz spectroscopy and ...

Theoretical Simulations of Silicon-On-Nothing (SON) Structures

C. Grau Turuelo[1], B. Bergmann[1], C. Breitkopf[1], F. Hoffmann[2], L. Brencher[2]
[1]Technische Universität Dresden, Dresden, Saxony, Germany
[2]Infineon Technologies GmbH, Dresden, Dresden, Saxony, Germany

A novel technique for semiconductor manufacturing is introduced: Silicon-On-Nothing. This process consists of an initial cylindrical trench which has a shape evolution under certain conditions: high temperature (1100 °C), low pressure (10 Torr) and a non-oxidizing atmosphere such as hydrogen. These conditions enable a, mainly, surface diffusion phenomenon whose final result is an empty space ...

Magnetotelluric Response Distortion Over Rugged Topography

D. Rizzello[1], P. Canepa[1], E. Armadillo[1]
[1]DISTAV - University of Genova, Genova, Italy

Topographic effects on magnetotelluric responses may be severe on rugged terrains. Finite elements simulation is a valuable tool to quantify this effect, due to its capability to match real morphologies. To do the estimate of the distortion, the AC/DC Module of COMSOL has been employed, using a model of homogeneous resistivity on which a DEM (Digital Elevation Model) profile of the Deep Freeze ...

Modeling and Optimization of a Mg-Metal Hydride Rectangular Tank in the Hydriding Process

E.I. Gkanas[1], S.S. Makridis[1], A.K. Stubos[2], A. Lopez[3], J. Folch[4], G. Noriega[4]
[1]Materials for Energy Applications Group, Department of Mechanical Engineering, University of Western Macedonia, Greece
[2]Environmental Technology Laboratory, Institute of Nuclear Technology and Radiation Protection, NCSR “Demokritos”, Greece
[3]Universidad Politécnica De Cataluña, Barcelona, Spain
[4]Cidete INGENIEROS, Barcelona, Spain

Hydrogen storage can be considered as a key factor in the development of hydrogen economy. Hydrogen storage in a magnesium hydride MgH2 is a very promising technique for numerous of reasons. Magnesium is abundant, relatively cheap, life – friendly , weight storage capacity of 7.6% and low price of Mg metal. A simulation work is presented in order to study the absorption kinetics of a Mg – ...

Mathematical Model for Prediction of Transmission Loss for Clay Brick Walls

J. Ratnieks[1], A. Jakovics[1], J. Klavins[1]
[1]Laboratory for Modeling Technological and Environmental Processes, University of Latvia, Riga, Latvia

A 2D numerical model for determination of sound reduction index is set up in this work. Results are in good agreement in middle and high frequency range when using solid structure approximation. Results are compared with experiment.

Modeling Micromechanics of Eigenstrain in Heterogeneous Media

Dr. Tewari is an Associate Professor in the Department of Mechanical Engineering at IIT Bombay. Prior to this he was a staff researcher at the General Motors Global R&D Center, Bangalore. He graduated with a B.Tech degree from IIT Kanpur followed by an MS and Ph.D. from Georgia Institute of Technology, Atlanta, USA. His area of research is in mathematical models for microstructural-mechanics. He ...

Design of a MEMS Resonator for a Centre Frequency Greater than 26.35 MHz and Temperature Coefficient Frequency Less than 0.5 ppm

S.Manikandan[1], R.Radeep krishna[1]
[1]Kalasalingam University, Department of ECE, Srivilliputtur ,Krishnan koil, Tamil Nadu, India

The variability of the design parameters caused by material properties like thermal conductivity is the major challenge in Micro Electromechanical System (MEMS). In resonator design the basic problem is that the frequency changes with temperature variation and quantitative explanation with respect to this varies. The change can be attributed to the stability in terms of frequency drift in parts ...

Modeling of Energy Efficient Continuous Sterilisation of ABP from Food Wastes

S. Dalrymple[1], R. Heslop[1]
[1]C-Tech Innovation Ltd. , Capenhurst, United Kingdom

Ohmic heating is a volumetric heating technology which can effectively process almost any pumpable fluid with extremely high energy efficiency (>95%). This is particularly useful for very thick fluids, those that burn on to hot surfaces and those with high solids content which would cause difficulties for conventional heating techniques. Processing of animal by-products (ABP) faces all these ...

Optimization of Architectured Structures in Building for Harness, Storage, and Release of Energy - new

C. Thoumyre[1], P. Lhuissier[1], L. Salvo[1], G. Bienvenu[2], M. Kermarrec[2]
[1]University Grenoble Alpes, SIMaP, Grenoble, France
[2]Hevatech, Ville-la-Grand, France

The problem of storage, and release of thermal energy is an important challenge in various industrial fields. Several systems for thermal energy storage exist like phase change materials (PCM) and thermochemical storage [1]. The first system usually addresses short term storage (day duration) while thermochemical storage are very interesting for longer duration (seasonal storage). However, ...

Improving Heating Uniformity of Dried Fruit in RF Treatments for Pest Control: Model Development and Validation - new

B. Alfaifi[1], J. Tang[2], Y. Jiao[2], S. Wang[3], B. Rasco[2], S. Jiao[2], S. Sablani[2]
[1]King Saud University, Riyadh, Saudi Arabia
[2]Washington State University, Pullman, WA, USA
[3]Northwest A&F University, Yangling, Shaanxi, China

Non-uniform heating is one of the most important challenges during the development of radio frequency (RF) heat treatments for pest control. A computer simulation model using finite element–based COMSOL Multiphysics® software was developed to investigate the heating uniformity of raisins packed in a rectangular plastic container and treated using RF heating. The developed model was then ...