Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abrangem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Current Density Simulations in the Electrodeposition from Ionic Liquids: Effects of the Conductivity

I. Perissi[1], C. Borri[1], S. Caporali[1], and A. Lavacchi[1]
[1]Department of Chemistry, University of Firenze, Sesto Fiorentino, FI, Italy

The overall goal of this work is the use of COMSOL Multiphysics® in the modeling of the current density distributions for the electrodeposition of aluminum coatings from ionic liquids. The local current distribution is strongly dependant on the conductivity and on the geometry of the galvanic cell and can only be computed by the numerical solution of the partial differential equations ...

Improving the Sensoring of PEM Fuel Cell by Numerical Techniques - new

S. Skoda[1], E. Robalinho[2], E. F. Cunha[1], M. Linardi[1]
[1]Instituto de Pesquisas Energéticas e Nucleares - IPEN/CNEN-SP, São Paulo, SP, Brazil
[2]Universidade Nove de Julho - UNINOVE, São Paulo, SP, Brazil

The use of numerical techniques in PEM fuel cell sensoring represents an advantage of project engineering, reducing the costs and accelerating the manufacturing of prototypes. In this work some numerical responses are shown, relating to numerical sensoring of water and oxygen mole fractions at cathode of a 5 cm² of geometric area PEM fuel cell. The need to recognize a geometric figure of merit ...

Modeling of Galvanic Interactions between AA5083 and Steel under Atmospheric Condition

D. Mizuno, Y. Shi, and R. Kelly
University of Virginia
Charlottesville, VA

Aluminum alloys 5000 series are widely used within the cabins of ships. These aluminum alloys are often joined via steel bolts. There is thus a concern that galvanic interactions will exacerbate corrosion of the aluminum alloys. In this study, a model of the galvanic corrosion between aluminum alloy AA5083 and steel under atmospheric conditions was built. The Nernst-Plank equation and the ...

Electrical Behaviour of a Li-ion Polymer Battery

P. Alamar[1], J. Esarte[1]
[1]Fundación CETENA, Navarra, Spain

With a view to estimating electrical characteristics of a Polymer Li-ion Battery during specific charge and discharge conditions, a COMSOL Multiphysics® model has been developed that accounts for electrochemical phenomena inside the device. Cell model has been created using the Li-Ion Battery interface, customizing material properties and electrochemical reactions. The electrochemical parameters ...

Numerical Modeling of Alkaline Fuel Cell

S. Dudi[1], R. K. Krishnan[2]
[1]IIT Madras, Chennai, Tamil Nadu, India
[2] ARCI, IITM Research Park, Chennai, Tamil Nadu, India

A fuel cell is an efficient and clean alternative power source of energy. Alkaline anion exchange membrane (AAEM) fuel cells are one in which conduction of oH- (hydroxyl ion) take place. The advantages of using alkaline fuel cells over proton exchange membrane fuel cells is that electrochemical kinetics is fast and alkaline environment is friendly for catalysts. Experiments performed at ...

Simulation of C-MEMS Based Enzymatic Biofuel Cell

Y. Parikh, V. Penmatsa, J. Yang, and C. Wang

Department of Mechanical & Material Science Engineering, Florida International University, Miami, FL, USA

An Enzymatic Biofuel Cell (EBFC) converts the chemical energy in biological fuels into electricity. In this work, we optimize the performance of the Carbon-Micro Electro Mechanical system in an EBFC by using COMSOL Multiphysics. With a simple model, we realized that most of the glucose reacts with enzymes at the top of the electrode posts, while the bottoms of the posts remain deficient of the ...

FEM Simulation of the Scanning Electrochemical Potential Microscopy (SECPM)

R. Hamou, P. Biedermann, M. Rohwerder, and A. Blumeneau
Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, Germany

The present work focuses on modeling a new experimental technique: Scanning Electro-chemical Potential Microscopy (SECPM), which is used to probe the potential profile of the electric double layer (EDL). We used an electrostatic approach to compute the EDL potential measured within the metallic probe. Also, we investigated the effect of the interaction of the electrode/probe double layers on the ...

Modeling of HTPEM Fuel Cell Start-Up Process by Using COMSOL Multiphysics

Y. Wang[1], D. Uwe Sauer[1]
[1]Electrochemical Energy Conversion and Storage Systems, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, Aachen, Germany

HTPEM fuel cells are considered to be the next generation fuel cells. The electrochemical kinetics for electrode reactions are enhanced by using PBI membrane at an operation temperature between 160-180 °C comparing to LTPEM fuel cells. But starting HTPEM fuel cells from room temperature to an operation temperature is a challenge. In this work, using preheated air to heat up the fuel cells ...

Numerical Modelling of Electrophoresis Applied to Restoration of Archaeological Organic Materials

J. Caire[1], A. Bouh[1], and E. Guilminot[2]
[1]LEPMI, UMR 5631, INPG - CNRS, Saint Martin d’Hères, France
[2]EPCC, Arc'Antique, Nantes, France

Restoration of archaeological materials from oceans is a major activity of Arc’ Antique. Organic materials such as wood, tissues, leathers, papers and ceramics found in sea water are always impregnated with salts. Rinsing such archaeological objects with pure water to extract the salts takes too long, so electrophoresis was used to improve the salt extraction. The objective of this ...

Optimizing Electrode Surface Area by COMSOL Multiphysics®

B K SRIHARI[1], Dr K Nagarajan[1], Dr B Prabhakar Reddy[1], P VENKATESH[1]
[1]Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu, India

In the design of electrorefiner, Working electrode and Counter electrode surface areas are very important. The main aim of this study is to understand the effect of the ratio of Anode to cathode Surface areas in an electrorefining cell. Application of this model to design electrorefiner for metallic spent nuclear fuel is discussed with respect to Uranium recovery. Shaping of real anode surface ...