Artigos Técnicos e Apresentações

Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abramgem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Modelling and Analysis of Acoustic Emissions and Structural Vibration in a Wind Turbine

B. Marmo, and B. Carruthers
Reactec Ltd., Edinburgh, United Kingdom

The onshore wind turbine industry must overcome many technical, commercial, and environmental difficulties. A significant element for planning consent is operational noise. Acoustic limits are strictly enforced and can lead to near-neighbour complaints as well as contractual disputes. Reactec have diagnosed, analysed and solved a problematic tonal resonance for a major wind turbine generator ...

Using COMSOL Multiphysics in Eddy Current Non Destructive Testing Context

L. Santandrea, and Y. Le Bihan
Laboratoire de Génie Electrique de Paris, Gif-sur-Yvette, France

Eddy current testing (ECT) is widely used to check the integrity of electrically conducting parts and notably to detect flaws. It is based on the interaction between a probe and the part under testing. The finite element method (FEM) is well fitted to the modelling of these kinds of problems because of its large flexibility which allows to deal with complex probe and part configurations. In this ...

Dual Phononic And Photonic Band Gaps In A Periodic Array Of Pillars Deposited On A Membrane

Y. Pennec, Y. El Hassouani, C. Li, B.D. Rouhani, E.H. El Boudouti, H. Larabi, and A. Akjouj
Institut d’Electronique, de Microélectronique et de Nanotechnologie, Université de Lille, Villeneuve d’Ascq, France

Phononic crystals are a class of materials that exhibit periodic variations in their density and elastic properties. Such crystals modify the propagation of acoustic waves and prohibit the propagation of sound for frequencies within the band gap. We discuss the simultaneous existence of phononic and photonic band gaps in a periodic array of silicon pillars deposited on a homogeneous SiO2 ...

Modelling Flow through Fractures in Porous Media

E. Holzbecher[1], W.L. Wah[1], and M-S. Litz[2]
[1]Georg-August Universität Göttingen, Germany
[2]Freie Universität Berlin, Germany

There are various alternative options concerning modeling fluid flow within fractures in porous media. We give a general overview, with remarks concerning the modeling using COMSOL Multiphysics. Moreover we define and study two test cases for intercomparison. Finally for one of the testcases some results of an extensive sensitivity study is presented.

Ultrasound Piezo-Disk Transducer Model For Material Parameter Optimization

L. Spicci, and M. Cati
Esaote SpA, Florence, Italy

The technology involved in high performance ultrasound imaging probes needs a reliable model to help in new projects development and performance simulations. To achieve a useful model, it is necessary to use correct values for all material parameters involved in the electro-acoustical performances of the piezoelectric material, but unfortunately some of these parameters are known only with high ...

Finite Element Analysis of Cables Heating Due to PoE/PoE+

S. Francois[1], and P. Namy[2]
[1]Nexans Research Center, Lyon cedex, France
[2]SIMTEC, Grenoble, France

Power over Ethernet (PoE/PoE+) is a technology allowing to transmit data and power over the same data cable. The major concern for this technology is the degradation of data transmission performances due to the temperature increase in the cable. To have a better quantitative and qualitative knowledge of the temperature field in the cables, Nexans has developed a 2D finite element thermal model ...

From CT Scan to Plantar Pressure Map Distribution of a 3D Anatomic Human Foot

S. Gerbino, and P. Franciosa
University of Molise, School of Engineering, Via Duca degli Abruzzi, Termoli, Italy

Understanding the stress-strain behavior of human foot tissues and pressure map distributions at the plantar interface is of interest into biomechanical investigations. In particular, monitoring plantar pressure maps is crucial to establishing the perceived human comfort of shoe insoles. A 3D anatomical detailed FE human foot model was created, starting from CT (Computer Tomography) scans of a ...

Using COMSOL to Solve for Currents along a Thin-Wire Antenna Excited by a Lumped Source

A. Shoory, A. Smorgonskiy, and F. Vega
Electromagnetic Compatibility (EMC) group, Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland

In this paper, we will present simulation results obtained using COMSOL RF module for the current along a wire antenna in both frequency and time domains. The structure is excited through a lumped (voltage or current) source at its center. For the frequency domain simulations we compare the results with the Numerical Electromagnetics Code (NEC-4) and for the time domain results we compare them ...

Deformation Behavior Of A Liquid Droplet Impacting A Solid Surface

S. Oukach[1], M. Elganaoui[1], B. Pateyron[1], and H. Hamdi[2]
[1]Laboratoire des Sciences des Procèdes Céramiques et de Traitements de Surface SPCTS, Limoges, France
[2]Laboratoire de Mécanique des Fluides et Energétique LMFE, Marrakech, Morocco

The quality of coatings obtained by means of thermal spraying depends strongly on the mechanism of the interaction between the molten droplets and the surface to be covered. The aim of the present study is to simulate the impact of a droplet onto a substrate, in order to have a good understanding of the dynamics of droplets impact. In this study, the process of droplet spreading is described; the ...

COMSOL Assistance For The Determination Of Pressure Drops In Complex Microfluidic Channels

J. Berthier, R. Renaudot, P. Dalle, G. Blanco-Gomez, F. Rivera, P. Caillat, and V. Agache
CEA-LETI, Grenoble, France

With the current trend towards always more complexity associated to more functionalities in biotechnological systems, it is required to know with accuracy the pressure drop in the circuitry of microfluidic systems. In general, a full three-dimensional calculation is not tractable due to the limited capacity of the computers. However, computational models can help to produce pressure drop ...

Quick Search