Artigos Técnicos e Apresentações

Aqui você encontrará apresentações realizadas nas Conferências de Usuários COMSOL de todo o mundo. As apresentações englobam pesquisas e produtos inovadores feitas por engenheiros e cientistas usando o COMSOL Multiphysics. Os tópicos abramgem uma grande gama de indústrias e aplicações, como elétrica, mecânica, escoamento e química. Use a função de busca "Quick Search" para encontrar apresentações na sua área de interesse.

Numerical Calculations of Pulsed Laser Heating of Non-isotropic Materials

Gamborg Andersen, G., Petrunin, V.V., Baurichter, A.
University of Southern Denmark, Physics Department, Odense, Denmark

We used FEMLAB (Finite Element Modelling LABoratory) for modelling heat propagation in 4 dimensions (time and the 3 spatial dimensions) after pulsed laser heating of non-isotropic materials during surface science experiments. As an example, the spatial and temporal evolution of a laser induced temperature jump in highly oriented pyrolytically grown graphite (HOPG) was calculated on a ns time ...

Mathematical modeling of nanomaterials

Strauss, D.J., Trenado, C.
Institute of New Materials, Saarbrücken

Mathematical modeling at the Institute of New Materials has played a crucial role in supporting the manufacturing and design of new technologies of nanomaterials, whose applications range from transportation, electronics and optics engineering to environmental sciences. In this paper, we focus our attention to two mathematical models together with their corresponding FEMLAB simulations: The ...

Confinement Loss Computations in Photonic Crystal Fibres using a Novel Perfectly Matched Layer Design

Viale, P., Février, S., Gérôme, F., Vilard, H.
IRCOM, CNRS UMR 6615, Limoges, France

To modelize infinite photonic crystal fibre (PCF) with 2D-finite-geometry mode solver, it is necessary to use a perfectly matched layer (PML). We have performed a new type of PML design to simulate propagation in PCFs. The results obtained with index-guiding PCFs are in very good agreement with previous theoretical published results. Our PML is quickly optimized. The link between MATLAB and ...

Modeling the Thermo-mechanical Behavior of a “V”-shaped Composite Buckle-beam Thermal Actuator

Kushkiev I., Jupina, M.A.
Department of Electrical and Computer Engineering, Villanova University, Villanova, PA

In this paper, we validate a numerical model of a “V”-shaped buckle-beam electro-thermal actuator through FEMLAB simulation. The motivation here is similar to that of the simulation of purely electronic VLSI circuits: before manufacturing a prototype, one wishes to virtually build the device and predict its behavior. FEMLAB allowed us to study the effect of temperature dependant ...

Double Gate MOSFET modeling

Gidon, S.
CEA Grenoble Leti

We use the MOS transistor model from COMSOL as a template to do our own model of double gate MOSFET. At the present time, it seems that double gate devices- going to non-planar transistor architectures- could be a solution for sub-32nm nodes. In addition, new design flexibility is allowed when gates are not interconnected. However, appropriate models must be developed. In our investigation, we ...

Simulation of Faults by Means of Finite Element Analysis in a Switched Reluctance Motor

Briso-Montiano, J.R., Karrelmeyer, R., Dilger, E., Bosch, R.
Robert Bosch GmbH Stuttgart, Dept. CR/AEY

The influence of the presence of errors in the behavior of a switched reluctance motor is investigated in this paper. The dynamic response of a Switched Reluctance Motor (SRM) is analyzed by the coupled structural and electromagnetic Finite Element Method (FEM). The dynamic behavior of the motor under failure operation can lead us to non-invasive diagnosis of faults and rotor eccentricity in ...

Finite Element Analysis of Fluid and Solute Transport in Hemodiafiltration Membranes

Steven Conrad
Computational Dynamics Laboratory
Louisiana State University
LA, USA

Fluid and solute transport in hemodiafilter hollow fibers occurs through a non-trivial interaction of convection and diffusion, modulated by a number of factors that include the non-Newtonian behavior of blood, the density and viscosity dependence of blood on the local hematocrit and protein concentration, the Fahraeus-Lindquist effect on hematocrit, the osmotic effects of protein and partially ...

FEM Characterization of Terahertz Wave on Metal Wire Waveguides

Deibel, J.A., Wang, K., Escarra, M.D., Mittleman, D.M.
Department of Electrical and Computer Engineering, Rice University, Houston, TX, USA

The terahertz (THz) region of the electromagnetic spectrum (100 GHz to 10 THz) remained relatively unexplored until developments in ultrafast laser technology provided techniques for the generation and detection of THz radiation. Recently, simple metal wires were found to be effective terahertz waveguides that exhibited very low loss and dispersion. The THz radiation propagates along the surface ...

Electromagnetics at Optical and Microwave Frequencies using COMSOL Multiphysics

Howie Stuart
Bell Laboratories, Lucent Technologies
Whippany, USA

The flexibility of COMSOL Multiphysics enables a variety of computational approaches to be applied towards solving electromagnetic problems across the whole spectrum. I will describe techniques for studying resonant electromagnetic interactions in a range of structures, including materials with negative electric permittivity (metals at optical frequencies), and small microwave resonators and ...

Simulation of roll coating process using FEMLAB

Manski, S.S.1, Mmbaga, J.P.1, Hayes, R.E.1, Bertrand, F.H.2, Tanguy, P.A.2
1 Department of Chemical and Materials Engineering, University of Alberta, Edmonton AB Canada
2 URPEI, Department of Chemical Engineering, Ecole Polytechnique, Montreal, Quebec, Canada

Paper coating operations involve a number of coupled multiphase interactions. The use of FEMLAB to study these coupled phenomena using a level set method is reported. Several problems, including the penetration of fluid into a porous media, flow split meniscus dynamics and entrapment of air bubbles during coating process are explored using a level set implementation. Fluid penetration from a ...

Quick Search