Galeria de Modelos

A Galeria de Modelos possui arquivos do COMSOL Multiphysics de várias áreas de aplicação incluindo elétrica, mecânica, escoamento e química. Você pode baixar modelos prontos e também tutoriais passo-a-passo para montar seu modelo, e usá-lo como ponto de partida para o seu próprio modelo. Use a função de busca "Quick Search" para encontrar modelos na sua área de interesse e faça o login ou o seu cadastro no COMSOL Access, cadastrando a sua licença do COMSOL, para poder baixar os arquivos.

GaAs PIN Photodiode

This simple model demonstrates how to use the Semiconductor Optoelectronics interfaces to model a simple GaAs PIN diode structure. Both the stimulated and spontaneous emission in the semiconductor are accounted for. The corresponding adsorption of the light and the associated change in the complex refractive index are included in a self consistent manner.

Ground Heat Recovery for Radiant Floor Heating

Geothermal heating is an environmentally friendly and energy efficient method to supply newer and well insulated houses with heat. The investment costs are higher than for gas or oil heating, so there is a need to investigate the possibilities of arranging heat collectors in the subsurface efficiently. This model compares three different pipe arrangements, embedded in the subsurface of the top ...

Vibrations in a Milk Container

This example illustrates a multiphysics application that involves a fluid-structure interaction. It simulates a filled milk container on a conveyor belt, which starts moving. The methodology presented here defines two problems, one for the container walls and one for the fluid. The two problems are subsequently merged into one problem using a special interface condition that imposes ...

Transport and Reaction in a Catalyst in 3D

Consider the study of a mass balance of a diluted species in air, for example, a pollutant in an exhaust stream. The model’s aim is to calculate the concentration profile of this species, which is decomposed by a catalyst present on the surface of a porous supporting structure. In a first step, you solve the velocity field for the solution assuming that the diluted pollutant has no influence ...

Optimization of a Tuning Fork, Modeled with LiveLink for SolidWorks

This model computes the fundamental eigenfrequency and eigenmode for a tuning fork that is synchronized from SolidWorks via the LiveLink interface. The length of the fork is then optimized so that the tuning fork sounds the note A, 440 Hz.

Lombardi Surface Mobility in a Semiconductor

Surface acoustic phonons and surface roughness have an important effect on the carrier mobility, especially in the thin inversion layer under the gate in MOSFETs. The Lombardi surface mobility model adds surface scattering resulting from these effects to an existing mobility model using Matthiessen’s rule. This model demonstrates how to use the Lombardi surface mobility model for the electron ...

Reaction Chain

This model describes the simultaneous transport of three solutes in a chain reaction within a variably saturated flow field. Involved are advection, dispersion, sorption, biodegradation, decay, and volatilization. The parent solute decays to a daughter product, which generates another tracked daughter. Built on the flow field described in Sorbing Solute, the transport scenario described here ...

Pacemaker Electrode, Modeled with LiveLink for Solid Edge

This model, dealing with the current and potential distribution around one pair of electrodes, demonstrates how to synchronize and modify geometry in Solid Edge by using the LiveLink interface.

Outgassing Pipes

This benchmark model computes the pressure in a system of outgassing pipes with a high aspect ratio. The results are compared with a 1D simulation and a Monte-Carlo simulation of the same system from the literature.

Distributed Bragg reflector

A distributed Bragg reflector (DBR) is a periodic structure formed from alternating dielectric layers that can be used to achieve nearly total reflection within a range of frequencies. In this model a Bragg reflector is modeled with a central wavelength of 550[nm] and stopband of 180[nm].

Quick Search