A Galeria de Aplicações possui tutorias sobre o COMSOL Multiphysics® e aplicativos de demonstração pertinentes às áreas de elétrica, mecânica estrutural, acústica, escoamento e química. Você pode usar esses exemplos como um ponto de partida para o seu próprio trabalho de simulação baixando o modelo do tutorial ou o aplicativo e suas instruções. Use a função "Busca Rápida" para encontrar modelos da sua área de interesse. Para baixar os arquivos MPH, faça o login, ou se cadastre, no COMSOL Access usando uma licença válida do COMSOL, para poder baixar os arquivos MPH. Note que muitos dos exemplos disponibilizados aqui também podem ser acessados através da Application Libraries que faz parte do software COMSOL Multiphysics® e está disponível a partir do menu File.


Modeling of a 3D Inductor

Inductors are used in many applications for low pass filtering or for impedance matching of predominantly capacitive loads. They are used in a wide frequency range from near static up to several MHz. An inductor usually has a magnetic core to increase the inductance, while keeping its size small. The magnetic core also reduces the electromagnetic interference with other devices as the magnetic ...

Evaporative Cooling of Water

This tutorial shows how to couple three physics interfaces to model evaporative cooling. The effects that need to be taken into account are heat transfer, transport of water vapor, and fluid flow. The Wet Surface feature is used to implement the source term for the water vapor and to compute the evaporative heat source available from the Boundary Heat Source feature. The Moist Air feature is ...

Steady-State 2D Heat Transfer with Conduction

This example shows a 2D steady-state thermal analysis including convection to a prescribed external (ambient) temperature. It is given as a benchmarking example. The benchmark result for the target location is a temperature of 18.25 C. The COMSOL Multiphysics model, using a default mesh with 556 elements, gives a temperature of 18.28 C. Successive uniform refinements show a temperature of 18.26 ...

Computing Capacitance

A capacitor, in its simplest form, is a two terminal electrical device that stores electric energy when a voltage difference is applied across the terminals. The stored electric energy is proportional to the applied voltage squared and is quantified by the capacitance of the device. This model introduces a model of a simple capacitor, the electric field and device capacitance are solved for ...

Shell-and-Tube Heat Exchanger

Shell-and-tube heat exchangers are commonly used in oil refineries and other large chemical processes. In this model, two separated fluids at different temperatures flow through the heat exchanger, one through the tubes (tube side) and the other through the shell around the tubes (shell side). Several design parameters and operating conditions influence the optimal performance of a shell and ...

Bracket - Transient Analysis

The bracket models are used as an introduction to structural mechanics modeling with the Structural Mechanics Module. The following features are introduced: * The fundamentals: static linear analysis * Parametric study * Including initial strain * Modeling thermal expansion * Adding a rigid connector * Adding spring conditions * Modeling with the *Shell* interface * Transient analysis * ...

Free Convection in a Water Glass

This model treats the free convection and heat transfer of a glass of cold water heated to room temperature. Initially, the glass and the water are at 5 °C and are then put on a table in a room at 25 °C. The nonisothermal flow is coupled to heat transfer using the Heat Transfer module.

Optical Scattering Off of a Gold Nanosphere

This model demonstrates the simulation of the scattering of a plane wave of light by a gold nanosphere. The scattering is computed for the optical frequency range over which gold can be modeled as a material with negative complex-valued permittivity. The far-field pattern and losses are computed.

Flow Through a Pipe Elbow

This example models the flow in a 90-degree pipe elbow. The flow is simulated using the k-omega turbulence model. The result is compared to engineering correlations.

Cable Tutorial Series

In this set of six tutorial models and associated documentation, you can investigate the capacitive, inductive, and thermal properties of a standard three-core lead-sheathed cross-linked polyethylene, high-voltage alternating current (XLPE HVAC) submarine cable (500 mm2, 220 kV). The series is intended both for experts looking to get up to speed on how to model such applications in the COMSOL ...