Galeria de Modelos

A Galeria de Modelos possui arquivos do COMSOL Multiphysics de várias áreas de aplicação incluindo elétrica, mecânica, escoamento e química. Você pode baixar modelos prontos e também tutoriais passo-a-passo para montar seu modelo, e usá-lo como ponto de partida para o seu próprio modelo. Use a função de busca "Quick Search" para encontrar modelos na sua área de interesse e faça o login ou o seu cadastro no COMSOL Access, cadastrando a sua licença do COMSOL, para poder baixar os arquivos.

Inductive Heating of a Steel Billet

A squared billet made of steel is introduced into a coil operating at low frequency. The process is used in order to make the temperature in a section of the billet homogeneous, since it loses energy faster through the edges than through the lateral boundaries. It is shown here that heating at such a low frequency is not efficient for overheating the edges, although is is very efficient for ...

Geoelectrics - Forward Problem and Sensitivity

The classical forward problem of geoelectrics (includes electrical resistivity tomography, ERT and earlier techniques as vertical electric sounding, VES) is the calculation of potentials at a given set of electrodes (M,N) while current is injected at other electrodes (A,B) into the ground. Typically the physical domain (earth) is unbounded to the sides and the bottom because of which one needs ...

Magnetic Prospecting of Iron Ore Deposits

Estimating center-of-mass coordinates and the spatial extent of iron-rich layers helps decrease the cost of exploration. Magnetic prospecting is applicable for doing this for certain types of iron ore deposits. Passive magnetic prospecting relies on accurate mapping of local geomagnetic anomalies – deviations from the natural magnetostatic fields based on the magnetic dipole of the Earth. ...

Small-Signal Analysis of an Inductor

If an inductor's magnetic material is nonlinear, then the inductance depends on the current passing through it. This model consists of an inductor with a nonlinear magnetic core, where the small-signal inductance is simulated as a function of current. The model also investigates how the small-signal inductance depends on the DC current.

Focusing Ions with a Quadrupole Lens

Just like optical lenses focus light, electric and magnetic lenses can focus beams of charged particles. Systems of magnetic quadrupole lenses find a common use in focusing both ion and particle beams in accelerators at nuclear and particle physics centers. This model shows the path of ions going through three consecutive magnetic quadrupole lenses. The model also takes fringing fields ...

Capacitive Micromotor

This tutorial shows how to model a 2D capacitive micromotor. The motor consists of a rotor and a stator made of polysilicon. The cogs of the stator are subjected to a time-varying pulsed voltage such that the voltage on adjacent cogs vary by a phase difference of 2p/3. As a result, a time-varying torque acts on the rotor thereby rotating it about its center. This model shows how to use an ...

Contact Impedance Comparison

The contact impedance boundary condition is meant to approximate a thin layer of material that impedes the flow of current normal to the boundary, but does not introduce any additional conduction path tangential to the boundary. This example compares the contact impedance boundary condition to a full-fidelity model and discusses the range of applicability of this boundary condition.

Electrodynamic Bearing 3D

This model illustrates the working principle of a passive electrodynamic bearing. An electrically conducting rotor rotating in a magnetic field produced by a permanent magnets induces eddy currents on the conducting rotor. The eddy currents, in turn, produce a magnetic field that opposes the magnetic fields by the magnets and induces a force that opposes the motion of the rotor. The radial ...

Capacitance in a Microstrip

To illustrate how to calculate lumped parameters of capacitance, this model calculates such in a microstrip. The example shows the two different ways of calculating this: with a static analysis and with a time-harmonic analysis.

Thin Low Permittivity Gap Comparison

The thin low permittivity gap boundary condition is meant to approximate a thin layer of material with low relative permittivity compared to its surroundings. This boundary condition is available for electrostatic field modeling. This example compares the thin low permittivity gap boundary condition to a full-fidelity model and discusses the range of applicability of this boundary condition.

Quick Search