Alexandre Oury | March 11, 2015
Today, we welcome a new guest blogger, Alexandre Oury of SIMTEC. He discusses the analysis of current distributions in a molten salt electro-refiner. In a webinar highlighting electrochemical recycling processes, SIMTEC presented a computational approach for predicting current distributions in a molten salt electro-refiner. The three main types of current distribution (primary, secondary, and tertiary) were treated, with a particular emphasis on the first two types. Using COMSOL Multiphysics, we implemented primary and secondary current distributions in an electrolysis cell.
Bridget Cunningham | March 10, 2015
Conserving and restoring art requires a balance between maintaining the quality of the work and respecting the artist’s initial creation. Advancing technologies now offer less invasive ways of analyzing artwork and bringing pieces back to their original condition. Since 2015 is the Year of Light, let’s explore how light can be used to conserve and restore paintings.
Bridget Cunningham | March 6, 2015
Reciprocating engines are used extensively for power generation in a variety of applications, most notably within the automobile industry. In the design process, it is important to ensure that all of the engine’s parts can withstand high stresses and loads in order to maximize the operational lifetime. Here, we analyze fatigue in an engine’s connecting rods.
Vincent Bruyere | March 4, 2015
Today, we are pleased to introduce a new guest author, Vincent Bruyere of SIMTEC, who shares insight into the modeling of induction furnaces. Induction heating has become an important process in many applications, from cooking meals to manufacturing. It is valued for its precision and efficiency along with being a non-contact form of heating. In this guest post, I will describe how to build an induction furnace model in COMSOL Multiphysics and demonstrate how it can enhance your design.
Andrew Griesmer | March 2, 2015
Lauren Sansone | February 26, 2015
Walter Frei | March 9, 2015
When using the COMSOL Multiphysics software to simulate wave electromagnetics problems in the frequency domain, there are several options for modeling boundaries through which a propagating electromagnetic wave will pass without reflection. Here, we will look at the Lumped Port boundary condition available in the RF Module and the Port boundary condition, which is available in both the RF Module and the Wave Optics Module.
Bridget Cunningham | March 5, 2015
Bridget Cunningham | March 3, 2015
In the diagnostics industry, developing devices that enable autonomous testing is an area of focus. One such device that has been available commercially for many years is the lateral flow test. With its easy-to-use format and short turn-around time for results, this device has become a valuable resource in medical diagnostics. See how researchers at the University of Rhode Island have built upon this technology to facilitate the diagnosis of more complex conditions.
Bridget Cunningham | February 27, 2015
Mads Herring Jensen | February 25, 2015
When inside a room — a conference room, concert hall, or even a car — everyone has an opinion of when the “acoustics” are good or bad. In room acoustics, we want to study this notion of sound quality in a quantitative way. In short, room acoustics is concerned with assessing the acoustics of enclosed spaces. The Acoustics Module of COMSOL Multiphysics has several tools to simulate the acoustics of rooms and other confined spaces. I will present those here.