Bridget Cunningham | September 15, 2015
Previously on the blog, we introduced you to the constructal law, the law of physics that accounts for the natural tendency of designs to evolve freely over time to flow more easily. As research has been conducted to support this pattern of design evolution, an even greater phenomenon has come to light: Humans and technology are one species, evolving together.
Henrik Sönnerlind | September 14, 2015
Brianne Costa | September 9, 2015
Fluid dampers have a range of uses, from stabilizing skyscrapers to controlling fluid flow in microflow devices. Through a process called viscous heating, these dampers are able to dissipate mechanical energy into heat. Too much heat can cause damage to the damper, so it’s important to understand the viscous heating process when optimizing your fluid damper designs.
Walter Frei | September 7, 2015
When using the finite element method, we often want to model solid objects that are rotating and translating within other domains. The deformed mesh interfaces in COMSOL Multiphysics can be used to model these movements. In this blog post, we will look at the modeling of large linear translations and rotations of domains within other domains, while introducing efficient modeling techniques for addressing such cases.
Walter Frei | September 2, 2015
Modeling geometries with high aspect ratios can be one of the more challenging tasks for the finite element analyst. You want to have a mesh that will accurately represent the geometry and the solution, but you do not want too many elements, as solving your models would then require excessive computational resources. Here, we will look at using swept meshing to generate efficient and accurate finite element meshes in the context of some common modeling cases.
Caty Fairclough | August 31, 2015
Adjusting the focal length of a camera lens allows you to change your angle of view. Miniature lenses can achieve this change by using a method called electrowetting. Electrowetting involves changing the balance of forces at a contact point of a free surface and a solid by applying a voltage. However, focus is not obtained immediately due to oscillations in the free surface. Here, we investigate the optimal viscosity for critically damping the free surface when a voltage is applied.
Caty Fairclough | September 11, 2015
Weight reduction is a key design focus in many applications. This is particularly true in the automotive industry, where lightweight materials help foster the development of fuel efficient cars. Maintaining the structural integrity of these materials is, of course, an important concern. As we will show you today, simulation is a valuable tool for addressing this challenge.
Walter Frei | September 8, 2015
Good competitive paddling requires strength, timing, consistency, and teamwork. Initially, this may seem quite easy. Simply stick your paddle in the water and make the water go backward so that the boat moves forward. As it turns out, there are actually many different paddling strokes you can use depending on the situation.
Walter Frei | September 4, 2015
Bridget Cunningham | September 1, 2015
An important element in the design of any simulation app is organization. Maintaining an orderly structure makes it easier for you to build the app and also enhances the usability experience for app users. Today, we will show you how to create organized apps in COMSOL Multiphysics with the help of subforms and form collections.
Fabio Bocchi | August 27, 2015
Each year, tennis players from around the world compete at the U.S. Open, one of the oldest and largest tennis tournaments. With the 2015 tournament approaching, I found myself reflecting on my own experiences playing tennis, particularly how the feeling you get after hitting the ball is never quite the same. Is this simply a figment of the imagination or is there a physical answer? As I will explain here, so-called “sweet spots” can account for this feeling.