Artigos Técnicos e Apresentações

Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Modeling Residual Stresses in Arc Welding

F. Roger[1], and A. Traidia[2]
[1]ENSTA Paristech, Paris, France
[2]AREVA NP, Saint Marcel, France

The prediction of mechanical response of assemblies during arc welding necessitates the knowledge of thermal history of the components and the constitutive behavior of the materials. COMSOL can simulate thermal and structural interaction but it needs to evaluate the time evolution of internal variables like viscoplastic strain and hardening parameters. In the present paper we extend the ...

A Transient Unified Model of Arc-Weld Pool Couplings During Pulsed Spot Gas Tungsten Arc Welding

A. Traidia[1], and F. Roger[2]
[1]AREVA NP, Technical Center, Saint Marcel, France
[2]ENSTA Paristech, Paris, France

Using COMSOL Multiphysics, a finite element model is introduced in this paper to describe the couplings between the welding arc and the weld pool dynamic in pulsed gas tungsten arc welding. The cathode, arc-plasma and melting anode regions are taken into account. The unified time-dependent model describes the heat transfer, fluid flow and electromagnetic fields in the three regions. The ...

Dynamic Structural Modelling of Wind Turbines Using COMSOL Multiphysics

C. Van der Woude, and S. Narasimhan
University of Waterloo, Waterloo, ON, Canada

This paper presents a study of a wind turbine subjected to wind and seismic loading, carried out using COMSOL Multiphysics. The dynamic properties and response of wind turbine structures are of interest, as recent developments in wind energy have led to the design and construction of increasingly large and flexible turbine structures. A typical turbine structure model was created in ...

Shape and Failure Control of Composite Laminates Using Piezoelectric Actuators

Z. Hasan
Texas A&M University, College Station, TX, USA

The present work focuses on the use of piezoelectric materials as actuators for shape control of composite laminates such as Lead Zircronate Titanate (PZT), and other piezoelectric fiber composites such as Active fiber composites (AFCs), Microfiber Composites (MFCs) which allow for improvement of their constitutive properties. By using embedded actuators, such that, the active part is ...

Failure Stress Analysis of Fiber Reinforced of Composite Laminates under Uniaxial/Biaxial Loading

Z. Hasan[1], F. Darwish[2], and S. Al-Absi[2]
[1]Texas A&M University, College Station, TX, USA
[2]Jordan University of Science and Technology, Irbid, Jordan

The main objective of the present work is to perform stress analysis on composite laminates under unaxial/biaxial loading to serve as a preliminary data for test verification. A detailed calculation based on the Classical Lamination Theory was performed for a laminate. The material used was carbon/epoxy applying a pure uniaxial load followed by a biaxial load. It was observed that the failure ...

Numerical Investigation of a Time-dependent Magnetic Actuation Technique for Tagging Biomolecules with Magnetic Nanoparticles in a Microfluidic System

A. Munir, J. Wang, Z. Zhu, and H.S. Zhou
Worcester Polytechnic Institute, Worcester, MA, USA

The magnetic body forces that act on mono-dispersed magnetic nanoparticles (MNPs) tagged biomolecules in a microfluidic system can be efficiently used in various applications that involve separation and detection including DNA and protein analysis, bio-defense, drug delivery, and pharmaceutical development. In this work, we report an FEM model to demonstrate a novel method of tagging biomolecules ...

Computational Methods for Multiphysics Applications with Fluid-structure Interaction

P. Seshaiyer[1], K. Nong[1], S. Garcia[2], E. Aulisa[3], and E. Swim[4]
[1]George Mason University, Farifax, VA, USA
[2]United States Naval Academy, Annapolis, MD, USA
[3]Texas Tech University, Lubbock, TX, USA
[4]Sam Houston State University, Huntsville, TX, USA

Efficient modeling and computation of the nonlinear interaction of fluid with a solid undergoing nonlinear deformation has remained a challenging problem in computational science and engineering. Direct numerical simulation of the non-linear equations, governing even the most simplified fluid-structure interaction model depends on the convergence of iterative solvers which in turn relies heavily ...

Analysis of Acoustic Response of Rooms

J.S. Crompton[1], L.T. Gritter[1], S. Yushanov[1], K.C. Koppenhoefer[1], and D. Magyari[2]
[1]AltaSim Technologies, LLC, Columbus, OH, USA
[2]Golden Acoustics, Detroit, MI, USA

The preferred acoustic response of recording studios, auditoriums and conference halls is to have an even energy response over the entire room and throughout full audio spectrum. This can be accomplished by using acoustic panels with complex surface structures that scatter acoustic waves and diffuse sound level variability over the room volume or through the use of sound absorbing materials to ...

Modeling and Simulation of a Piezoelectric Micro-Power Generator

E. Abdel-Rahman, M. Pallapa, M.A.S. Aly, L. Wong, A.I.H. Chen, K.W. Wong, and J.T. Yeow
University of Waterloo, Waterloo, ON, Canada

Micro-power generators (MPGs) harvest and store small amounts of ambient energy. The motivation of this paper is to compare the MPG modeling and simulation results obtained from COMSOL Multiphysics® with those obtained using three other approaches: CoventorWare®, ANSYS® and lumped element analysis. The MPG is composed of two identical micro-cantilever beams made of a piezoelectric ...

Modeling Energy Harvesting From Membrane Vibrations in COMSOL

R.K. Kapania, R.C. Singh, and C. Sultan
Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

This paper presents an ongoing effort, motivated by developing self-contained sensors for structural health monitoring of inflatable structures, to model the process of extracting useable electrical power from the mechanical vibrations of thin, prestressed membrane structures. Energy harvesting from mechanical vibrations of these structures may provide enough power to operate both the sensors as ...

Quick Search

1 - 10 of 150 First | < Previous | Next > | Last