Artigos Técnicos e Apresentações

Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Dynamic Crack Propagation in Fiber Reinforced Composites

C. Caruso[1], P. Lonetti[1], and A. Manna[1]

[1]Department of Structural Engineering, University of Calabria, Arcavacata di Rende, CS, Italy

A generalized model to predict dynamic crack propagation in fiber composite structures is proposed. The proposed approach is based on a generalized formulation based on the Fracture Mechanics approach and Moving mesh methodology. Consistently to the Fracture Mechanics, the crack propagation depends from the energy release rate and its mode components, which are calculated by means of the ...

Finite Element Analysis of Thermal Fatigue in Thermal Barrier Coatings

U. Bardi[1], C. Borri[1], A. Fossati[1], A. Lavacchi[1], and I. Perissi[1]
[1]Dipartimento di Chimica, Università degli Studi di Firenze, Sesto Fiorentino, FI, Italy

A Finite element model of plasma sprayed TBC’s was developed to estimate the stress induced by thermal cycling experiments. A heat transfer analysis was performed to evaluate the temperature distribution on the specimen during the cooling under an impinging air jet; temperature measurements performed with an infrared pyrometer on the cooled samples show good agreement with the evaluated ...

Equation-Based Modelling: True Large Strain, Large Displacement and Anand's Plasticity Model with COMSOL's Moving Mesh Application Mode

O. Toscanelli[1], V. Colla[1], and M. Vannucci[1]

[1]Scuola Superiore S. Anna, Pontedera, PI, Italy

In this work the solution of the structural problem obtained by mean of the velocity approach is presented. More in detail the balance and constitutive equations are expressed in Eulerian form, the mesh is not material. The approach is general, is suitable both for material boundary or no-material boundary and for a generic material model. The Hooke's elastic model and the Anand's plasticity ...

Multibody Contact Analysis of an Rzeppa CV-Joint

L. Armellin[1], F. Gatelli[1], and G. Tanghetti[1]

[1]R&D Department, Metelli S.p.A., Cologne, BS, Italy

Ball joints are widely used in many applications. This paper describes the contact and kinematic analysis of an Rzeppa type constant-velocity joint (CV-joint). Starting from a conveniently simplified 3D model, at fixed joint angle of 45°, a CV-joint made of all “generic steel” components has been studied. Considering only a “perfect” geometry (i.e. not affected by ...

Radionuclide Transport Through Different Routes Near a Deposition Hole for Spent Nuclear Fuel

V-M.S. Pulkkanen[1]

[1]VTT, Technical Research Centre of Finland, Espoo, Finland

Radionuclide transport modeling is a part of the research concerning geological disposal of spent nuclear fuel. Typically, the transport models near a single deposition hole focus on the reactions of nuclides, while the model geometry and the flow of groundwater are often simplified. In this paper, instead, a radionuclide transport model in a detailed 3D geometry with no reactions is introduced. ...

Modelling of Heat and Mass Transfer in Food Products

[1]M.B. Andreasen

[1]Danish Technological Institute, Aarhus C, Denmark

The use of the finite element method for understanding and analyzing the freezing and drying processes of food products is in focus in this paper. The objective of this study is to develop a model that can predict temperature distribution and weight loss of food products during the freezing and drying processes. The problem was solved by utilizing heat, mass transfer and moving mesh model. In ...

Finite Element Modeling of Ultrasonic Transducers for Polymer Characterization

S. De Paolis[1], F. Lionetto[1], and A. Maffezzoli[1]

[1]Department of Innovation Engineering, University of Salento, Lecce, Italy

Finite element analysis has been used to model the ultrasonic wave propagation both in a custom made transducer and in the tested polymer sample. The model consists of acoustic (passive elements) and electroacoustic (active elements) transmission lines. The simulation of the acoustic propagation accounts for the interaction between the transducer and the materials in the buffer rods, and the ...

A Consistent Environment for the Numerical Prediction of the Properties of Composite Materials

J. Schumacher[1], P. Fideu[2], G. Ziegmann[1], and A. Herrmann[3]
[1]TU Clausthal-Institute of Polymere Materials and Plastic Engineering, Clausthal-Zellerfeld, Germany
[2]CTC GmbH Stade, Stade, Germany
[3]Faserinstitut Bremen e.V., Bremen, Germany

The current paper focuses on the creation of a consistent environment for the numerical prediction of the physical properties of polymer composite. A limitation factor for the successful simulation of composite processes is the correct estimation of the effective properties depending on several factors such as the constituents (fiber, polymer), the process setup. The numerical prediction of the ...

Design and Simulation of a Microscale Magnetophoretic Device for the Separation of Nucleated Fetal Red Blood Cells from Maternal Blood

G. Schiavone[1], D.M. Kavanagh[2], and M.P.Y Desmulliez[2]

[1]Politecnico di Torino, Torino, Italy
[2]MIcroSystems Engineering Centre, School of Engineering & Physical Sciences, Heriot-Watt University, Edinburgh, Scotland, United Kingdom

Intense research has been carried out into methods that aim at harvesting fetal cells from maternal blood as substitutes to amniocentesis and chorionic villus sampling. This work focuses on the separation of fetal nucleated red blood cells from the maternal circulation based on their intrinsic magnetic properties. The design and simulation of a magnetophoretic separator is described, as it will ...

Bobbin Tool Friction Stir Welding: A Moving Geometry Model

J. Hilgert[1], H. Schmidt[2], and J. Dos Santos[1]

[1]GKSS Forschungszentrum GmbH, Geesthacht, Germany
[2]Danmarks Tekniske Universitet, Kgs. Lyngby, Denmark

Based on the example of a bobbin tool Friction Stir Welding process model a technique to model thermal processes with a moving geometry in COMSOL is introduced. The described approach allows modeling the transient temperature fields in setups that are governed by a large relative movement of different parts of the geometry. The movement of the tool is realized in a sequence of discrete time ...

Quick Search

1 - 10 of 209 First | < Previous | Next > | Last