Galeria de Modelos

A Galeria de Modelos possui arquivos do COMSOL Multiphysics de várias áreas de aplicação incluindo elétrica, mecânica, escoamento e química. Você pode baixar modelos prontos e também tutoriais passo-a-passo para montar seu modelo, e usá-lo como ponto de partida para o seu próprio modelo. Use a função de busca "Quick Search" para encontrar modelos na sua área de interesse e faça o login ou o seu cadastro no COMSOL Access, cadastrando a sua licença do COMSOL, para poder baixar os arquivos.

Vibrating Particle in Water: Correct Thermoacoustic Material Parameters

This is a tutorial model that simulates a small vibrating hemispherical particle in water. The vibrations induce acoustic waves in the fluid. The model shows how to set up the material parameters in a thermoacoustic model to get the correct acoustic (compressible) waves in the fluid.

Photoacoustic Resonator

This is a model of a simple photoacoustic (or optoacoustic) resonator. A pulsating laser heats a gas causing expansion and contraction and thus creates pressure waves. Such devices are used as sensors for measuring material parameters of the gas inside the resonator. The resonance frequency of the system depends on the gas in the resonator. The model uses the thermoacoustic interface with a ...

Doppler Shift

We have all noticed the Doppler effect when an ambulance passes by with its sirens blaring. The siren’s pitch suddenly drops the moment the ambulance starts moving away from you. Another effect you can notice is how the siren’s sound is very loud when nearby, but as soon as the ambulance has passed the sound becomes much quieter. This model simulates the acoustic Doppler effect by ...

Bessel Panel

The Bessel panel is a way to arrange a number of loudspeakers so that the angular sound distribution resembles that of a single speaker. This model combines five Bessel panels in the same pattern to approximate a purely radial sound field. The speakers are driven with different signals, some of them in counter-phase. This results in an approximately homogeneous polar far-field ...

Jet Pipe

This example models the radiation of fan noise from the annular duct of a turbofan aeroengine. When the jet stream exits the duct, a vortex sheet appears along the extension of the duct wall due to the surrounding air moving at a lower speed. The near field on both sides of the vortex sheet is calculated. The Aeroacoustics modeling interface in the Acoustics Module describes acoustic waves in a ...

Absorptive Muffler with Shells

This model describes the pressure wave propagation in a muffler for an internal combustion engine. The purpose of the model is to show how to analyze both inductive and resistive damping in pressure acoustics as well as coupling the fluid to the surrounding elastic shell structure of the muffler. Finally, the eigenmodes of a pure structural problem is analyzed and the modes compared to peaks in ...

Acoustic Muffler with Thermoacoustic Impedance Lumping

This model utilizes the thermoacoustic interface in a submodel to obtain a detailed (and more precise) measure for the transfer impedance of a perforated plate. The impedance is in turn used as an internal impedance in a pressure acoustic model of a muffler. Results are compared to classic impedance models.

Eigenmodes in a Muffler

In this model, compute the propagating modes in the chamber of an automotive muffler. The geometry is a cross-section of the chamber in the Absorptive Muffler example. The model’s purpose is to study the shape of the propagating modes and to find their cut-off frequencies. As discussed in the documentation for the Absorptive Muffler, some of the modes significantly affect the damping of the ...

Two-port Piezoelectric SAW Device

This tutorial shows how to model surface acoustic waves in time domain. The 3D modeling geometry represents a 128 degree YX-cut lithium niobate substrate. The SAW device has two ports. The metallic electrodes are modeled as perfect conductors using boundary conditions. The geometric dimensions such as size of substrate, the gap between the ports and the number of inter-digitated electrodes (IDTs) ...

Lumped Receiver Connected to Test Set-up with an 0.4-cc Coupler - new

In this model a Knowles ED23146 receiver (miniature loudspeaker) is connected to a test set-up consisting of a 50 mm (1 mm diameter) earmold tube and a so-called 0.4-cc coupler. The receiver is modeled using a lumped spice network and connected to the finite element domain at the tube inlet. The response at the measurement microphone in the coupler as well as the electric input impedance to the ...

Quick Search