Galeria de Modelos

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

E-core Transformer Using Multi-Turn Coil Domains

This is the transient model of a single phase E-core transformer using a Multi-Turn Coil Domain. The model includes the effect of a nonlinear B-H curve in the core and shows how to connect the transformer model to the external circuits using Electric Circuit interface. The simulation is performed for two different cases; the first one with a unity turn ratio and second one with a turn ratio of ...

Single-turn and Multi-turn Coil Domains in 3D

This tutorial illustrates how to use the Single-Turn Coil Domain and Multi-Turn Coil Domain features for modeling 3D coils. Both DC and AC coil modeling strategies are discussed. A series of simple illustrative tutorials are used to show different possible ways of using the following features. 1. Single-turn coil domain a) Gap feed b) Boundary feed 2. Multi-turn coil domain a) Linear coil b) ...

Inductive Heating of a Copper Cylinder

The induced currents in a copper cylinder produce heat that in turn change the electrical conductivity. This means that the field propagation has to be solved simultaneously with the heat transfer through the cylinder and surrounding system. This model shows this coupling between eddy currents are heat transfer as a tutorial example.

Simulating the Moving Parts of a Generator

In this model, a rotor with permanent magnets and a nonlinear magnetic material rotates within a stator of the same magnetic material. The generated voltage in windings around the stator is calculated as a function of time. COMSOL Multiphysics models the rotation with assemblies and identity pairs. The nonlinearity of the magnetic material is also taken into account using an interpolation ...

Modeling of a 3D Inductor

Inductors are used in many applications for low pass filtering or for impedance matching of predominantly capacitive loads. They are used in a wide frequency range from near static up to several MHz. An inductor usually has a magnetic core to increase the inductance, while keeping its size small. The magnetic core also reduces the electromagnetic interference with other devices as the magnetic ...

Simulating a Generator Made From Nonlinear Materials

This model is a static 3D simulation of a generator having a rotor with permanent magnets. The center of the rotor consists of annealed medium carbon steel, which is a nonlinear ferromagnetic material that is saturated at high magnetic flux densities. The core is surrounded by several blocks of a permanent magnet made of samarium and cobalt, creating a strong magnetic field. The stator is made ...

Inductor in an Amplifier Circuit

This model shows how to combine an electric circuit simulation with a finite element simulation. The finite element model is an inductor with a nonlinear magnetic core and 1000 turns, where the number of turns is modeled using a distributed current technique. The circuit is imported into COMSOL Multiphysics as a SPICE netlist, which merges the inductor model and the circuit elements as ODEs.

Transient Modeling of a Capacitor in a Circuit

A transient model of a capacitor is solved in combination with an external electrical circuit. The finite element model of the capacitor is combined with a circuit model of a voltage source and a resistor. A step change in voltage is applied, and the transient current through the capacitor is computed and compared to the analytic result.

The Magnetic Field from a Permanent Magnet

As an example of a magnetostatic problem, consider how to model a horseshoe-shaped permanent magnet. One way is to treat the entire magnet as a ferromagnetic material, where the two end sections are defined as being pre-magnetized in different and opposite directions. An alternative is to set surface currents on the pre-magnetized parts. In this tutorial model, both of the alternatives are ...

Multi-turn Coil over an Asymmetric Conductor Plate

This model solves the Testing Electromagnetic Analysis Methods (TEAM) problem 7, “Asymmetrical Conductor with a Hole”—a benchmark problem concerning the calculation of eddy currents and magnetic fields produced when an aluminum conductor is placed asymmetrically above a multi-turn coil carrying a sinusoidally varying current. The simulation results at specified positions in space are ...

Quick Search

1 - 10 of 70 First | < Previous | Next > | Last